Model No. |
6-DIGIT MICROPROCESSOR METER FOR DC VOLTS, CURRENT, TEMPERATURE, AND STRAIN WITH SENSOR EXCITATION |
INF
Series |
Standard features include 4-open collector outputs, wide selection of input ranges, peak and valley detection, smart filtering, large digital offset capabilities, on-board sensor excitation, and field installable output, control and communication options. |
INPUT TYPE |
DESCRIPTION |
PRICE |
INFP |
Process meter accepts 0-100 mV, +50 mV, 0-5 V, 1-5 V, 0-10 V, +5 Vdc, 0-20 mA and 4-20 mAdc inputs, with 5, 10, 12 or 24 Vdc sensor excitation. Factory default setup is 4-20 mA input with 24 V sensor excitation and scaled to display 0-100.0 |
|
PROCESS-INFINITY meter |
$545.00 |
|
PROCESS-INFINITY "Split meter with remote display" |
$595.00 |
INFS |
STRAIN-INFINITY meter for strain gage, pressure transducer, load cell and virtually any bridge input. On-board transducer excitation. Easy scaling to engineering units. Factory default setup is 0-100 mV input with 10 V dc sensor excitation scaled to display 0 to 100000. |
|
STRAIN-INFINITY meter |
$545.00 |
|
STRAIN-INFINITY "Split meter with remote display" |
$595.00 |
INFW |
SCALE-INFINITY meter offers a wide range of DC voltage and current inputs that can be configured to display and transmit your input signal in any engineering units. Factory default setup is 0-100 mV input with 10 Vdc sensor excitation scaled to display 0 to 1000000. |
|
SCALE-INFINITY meter |
$595.00 |
|
SCALE-INFINITY "Split meter with remote display" |
$645.00 |
INFU |
UNIVERSAL-INFINITY meter with all the capabilities of the Temperature, Process and Strain versions available in one instrument. Factory default setup is 0-100 mV DC input with 10 Vdc sensor excitation to display 0 to 100000. |
|
UNIVERSAL-INFINITY meter |
$645.00 |
|
UNIVERSAL-INFINITY "Split meter with remote display" |
$695.00 |
INFT |
TEMPERATURE-INFINITY meter with all the capabilities of the Temperature, Process and Strain versions available in one instrument. Factory default setup is 0-100 mV DC input with 10 Vdc sensor excitation to display 0 to 100000. |
|
TEMPERATURE-INFINITY meter |
$595.00 |
|
TEMPERATURE-INFINITY "Split meter with remote display" |
$645.00 |
OPTIONS |
DESCRIPTION |
PRICE |
POWER AND LED COLOR |
0 |
Designates 115 Vac power and red LED display |
N/C |
1 |
Designates 230 Vac power and red LED display |
N/C |
2 |
Designates 115 Vac power and green LED display |
N/C |
3 |
Designates 230 Vac power and green LED display |
N/C |
4 |
Designates 10-32 Vdc power and red LED display* |
$110.00 |
5 |
Designates 10-32 Vdc power and green LED display* |
$110.00 |
* Not available REL4 below.- |
BCD AND CONTROL OUTPUT (S) |
0 |
Four optically isolated open-collector outputs |
N/C |
1 |
Isolated parallel BCD output (BCD1) |
$110.00 |
2 |
Isolated dual 7 A relays (REL1) |
$75.00 |
3 |
Isolated dual 7 amp and dual 1 amp relays* (REL4) |
$175.00 |
| * Not available with dc power options 4 and 5 above. |
ANALOG OUTPUT |
0 |
No analog output |
N/C |
1 |
Isolated analog output (0-20 mA, 4-20 mA, 0-5 V, 1-5 V, 0-10 V (AN02) |
$110.00 |
SERIAL OUTPUTS |
0 |
No serial output |
N/C |
1 |
Isolated RS-232 serial output* (RS20) |
$110.00 |
2 |
Isolated RS-485 serial addressable output* (RS40) |
$110.00 |
* Includes 6’ of interconnecting cable with telephone plug connectors. See serial connector accessories below for conversion to "D" type connectors. |
TEMPERATURE |
TC |
J, K, E, T, B, S, N or DIN J in degrees C, F or K |
N/C |
RTD1 |
10 ohm copper** |
N/C |
RTD2 |
100 ohm platinum with 0.00385 alpha** |
N/C |
RTD3 |
100 ohm platinum with 0.00392 alpha** |
N/C |
**Enter C for Celsius, F for Fahrenheit, or K for Kelvin.
NOTE: All of the above ranges are available on the Universal INFINITY®. |
ADD-ON OPTIONS |
FS |
Special calibration configuration |
$25.00 |
BL |
Blank Lens |
$15.00 |
ACCESSORIES |
9SC2 |
9-pin serial connector with RJ-11 jack for RS-232 |
$30.00 |
9SC4 |
9-pin serial connector with RJ-12 jack for RS-485 |
$30.00 |
25SC2 |
25-pin serial connector with RJ-11 jack for RS-232 |
$30.00 |
25SC4 |
25-pin serial connector with RJ-12 jack for RS-485 |
$30.00 |
SP1 |
Split connector for RS-485 network |
$15.00 |
