 |
Hypodermic and Mini Hypodermic Probes - Thermocouple and RTD Elements
HYP-1 / HYP-2 / HYP-3 / HYP-4
The HYP-0 Mini Hypodermic probe with a needle diameter of only 0.2 mm (0.008") is the least likely to disturb the surrounding insertion area. Binocular microscope micro-manufacturing techniques result in an extremely small type T (Copper-Constantan) thermocouple being implanted in a 33 gage, 25 mm (1") long stainless steel hypodermic needle. The HYP-0 has the fastest response of the hypodermic probes, and has a continuous temperature rating of 200°C (400°)F. It has 1.5 m (5') long Teflon® coated, 36 AWG leads with an SMP type subminiature connector.
All probes were designed for industrial, laboratory, manufacturing and chemical research only. They are not intended for medicinal use, or on humans. Newport Electronics, Inc. assumes no responsibility if these products are used for medicinal purposes, or on humans, or are misused in any way.
Ordering Example: HYP1-30-1/2-T-G-60-SMP-M, thermocouple probe, $102.
HYP-1 / HYP-2 / HYP-3 / HYP-4
|
NEWPORT®
Hypodermic Needle Temperature Probes are designed for industrial,
laboratory, manufacturing and chemical research applications.
Five probe types are available, with diameters from 0.2 mm (0.008")
to 1.65 mm (0.065"). The HYP-0, HYP-1 and HYP-2 have type T
(Copper-Constantan) thermocouple elements, while the HYP-3 is
available in J, K, T or E calibration, and the HYP-4 has a 100
ohm Platinum RTD (a = 0.00385).
The HYP-0 is a mini-hypodermic probe, with 0.2 mm (0.008") diameter. The HYP-1 has an O.D. of 0.3 mm (0.012"), and has an added feature of being steam autoclavable to temperatures up to 160°C (325°F). The HYP-3 and 4 are industrial probes, with thermocouple and RTD elements respectively. |
The HYP-0 Mini Hypodermic probe with a needle diameter of only 0.2 mm (0.008") is the least likely to disturb the surrounding insertion area. Binocular microscope micro-manufacturing techniques result in an extremely small type T (Copper-Constantan) thermocouple being implanted in a 33 gage, 25 mm (1") long stainless steel hypodermic needle. The HYP-0 has the fastest response of the hypodermic probes, and has a continuous temperature rating of 200°C (400°)F. It has 1.5 m (5') long Teflon® coated, 36 AWG leads with an SMP type subminiature connector.
| Thermocouple
Probe Model HYP-1 NEWPORT® Research, autoclavable probe is designed to give instant readings in plants, other semi-solids and liquids. A 30 gauge x 13mm (0.5") needle provides this very fast response. The measurable temperature range is cryogenic to 200°C (400°F). This is a type “T” (Copper-Constantan) grounded-junction probe with Teflon® insulated extension wire and a subminiature male connector termination. The entire assembly is steam autoclavable to a temperature of 160°C (325°F). All probes have 1.5 m (5') leads. |
 These probes should not be used for human implantation
|
||||||
| Thermocouple
Probe Model HYP-2 The HYP-2 Probes have Natural Science, Industrial and Food Processing uses. This assembly comes complete with a type “T” (Copper-Constantan) element, 1.2 m (4') Teflon® insulated lead wires, and uses a standard (21 gage) hypodermic needle 38 mm (1.5") long. 1.2 m (4') lead wire is standard. Standard size male connector terminates the lead wire. |
 These probes should not be used for human implantation
|
||||||
| Thermocouple
Probe Model HYP-3 NEWPORT® Industrial Hypodermic Probe uses a sixteen 16 gage x 38 mm (1.5") long needle and may contain J, K, T, E calibrations; they may have a grounded or ungrounded junction, and come with stainless steel overbraided extension wire. The stainless steel overbraiding adds flexibility and extends the probe life. These probes are not autoclavable. They are designed for heavy-duty service. 1.2 m (4') lead wire is standard. Maximum tip temperature is 200°C (400°F). |
 These probes should not be used for human implantation
|
||||||
| Calibrations | |||
|
J =
|
K
=
|
T
=
|
E
=
|
|
Iron-Constantan
|
CHROMEGA®-ALOMEGA®
|
Copper
Constantan
|
CHROMEGA®-Constantan
|
*Specify
calibration: J, K, T, E
**Specify measuring junction style: U OR G When ordering, specify calibration and whether grounded or ungrounded junction is desired
Also Available: R and S (platinum)—consult factory for price and delivery
Easy Grip Handle, add “EGH” suffix, additional price $10.
**Specify measuring junction style: U OR G When ordering, specify calibration and whether grounded or ungrounded junction is desired
Also Available: R and S (platinum)—consult factory for price and delivery
Easy Grip Handle, add “EGH” suffix, additional price $10.
| RTD
Probe Model HYP-4 The RTD Hypodermic Probes are offered for Industrial, Natural Sciences and Food Processing use. These probes contain a 100 ohm platinum RTD (a = .00385) within a sixteen 16 gage x 38 mm (1.5") hypodermic needle, and come with 1.2 m (4') Teflon® insulated lead wire. |
 These probes should not be used for human implantation
|
||||||
All probes were designed for industrial, laboratory, manufacturing and chemical research only. They are not intended for medicinal use, or on humans. Newport Electronics, Inc. assumes no responsibility if these products are used for medicinal purposes, or on humans, or are misused in any way.
Ordering Example: HYP1-30-1/2-T-G-60-SMP-M, thermocouple probe, $102.
Copyright 2003,
NEWPORT Electronics, Inc. All rights reserved.